System's Framing Parameters
System's framing parameters are:
Frame layer: | |
FRM_BASE_HEIGHT | Height of the frame's bottom end |
FRM_HEIGHT | Height of the frame from the bottom plate to top plate |
STUD_H | Width of the stud, usually the same as the thickness of the frame layer. |
Exterior nailer: | |
EXT_NAILER | Tells, if an exterior nailer is used, 0 or 1 |
EXT_NLR_W | Depth of the nailer |
INS_EXT | Insulated, 0 or 1 |
Interior nailer: | |
INT_NAILER | Tells, if an interior nailer is used, 0 or 1 |
INT_NLR_W | Depth of the nailer |
INS_INT | Insulated, 0 or 1 |
Exterior sheathing: | |
SHT_THICK | Thickness of the sheet |
Second exterior sheathing: | |
SHT2_THICK | Thickness of the sheet |
Interior sheathing: | |
INTFIN_THICK | Thickness of the sheet |
Second interior sheathing: | |
INTF2_THICK | Thickness of the sheet |
Siding: | |
SID_THICK | Thickness of the siding |
SID_OFFSET | Depth of the air gap behind the siding |