Options in Wall Panel Design
Option System
When you create a new project based on a solved option model, you can automatically add the panel breaks and create the wall panel drawings during option solving. The panel breaks are added and the wall panels created after all the selected options are solved, unless otherwise defined in the system settings. Define the automatic panelizing of walls by setting the keyword frame_solved_job in the BDSXX keyword group:
frame_solved_job= MODE
MODE can have the following values:
| 0: | Do not create the panel breaks or panel drawings. This is the default value. |
| +1: | Create panel breaks. |
| +2: | Create wall panel drawings. |
| +4: | Do not ask the number of the first panel from the user. |
| +8: | Start numbering the panels in the floor plan from left to right, from bottom to top. |
| +16: | Can be used, when MODE= 1 or MODE= 1+2. If the reverse_building option is to be solved, the building will only be mirrored after the panel breaks have been added and the panel drawings created. |
For example:
frame_solved_job= 1+2+4
The panel breaks are added to all walls of the building, both interior and exterior walls. The corner overlap is the default overlap defined with the corner_overlap_mode keyword in the WALLS keyword group. The number of the first panel is asked from the user. If MODE= +4 is used, the question is not displayed, but the numbering is started from the first free number.
