Edit the Primary Support

  1. On the tab, in the Fastening group, select Edit, and select Edit primary support.
  2. Click the support to be edited. If the pipeline has multiple similar supports, you can edit them all at once by selecting Edit all similar one the same pipe line from the left side auxiliary menu.
  3. The program opens the current support data on the top bar.
  4. Select or set the primary support data. For example:
    • Fill in the support position. You can also leave the field blank and enter the support position later.
      Note: When editing multiple similar supports, the position is added only to the selected support.
    • Type, such as Pipe slide, 1-sided fixed point, etc.
    • Lugs, stoppers.
    • Pipe clamp angle.
    • Top DN. The DN is changed by clicking in the model.
    • You can also use the Dimensions button to change the dimensions of the support or the support parts. For example, you can change the clamp angle, the suspension spring used, the perch, etc.
    • Use the Change button to change the support to another type.
  5. Change the desired values and confirm by clicking OK.
  6. If you have selected multiple similar supports on the pipeline to edit, changes apply to all of them at once.