Tool Strip

The tool strip contains a number of frequently used functions.

When the tool strip is pinned, it is visible all the time. When the tool strip is hidden, it appears when you move the cursor to the top edge / right edge of the working window. You can pin and hide the tool strip by clicking:

If the working window is too low or narrow for the tool strip to fit inside, the pinning is dismissed and the tool strip is automatically hidden.

By default, the tool strip is located at the top of the working window. You can move the tool strip to the right edge / top edge of the working window by clicking:

The functions on the tool strip depend on the active working window (2D/3D).

Tool strip - 2D

  1. Verify Distance
  2. Selection Method: Rectangle
  3. Selection Method: Polygon
  4. Selection Method: Crossing Polygon
  5. Selection Filter
  6. Make All Layers Visible
  7. Select Layers from List
  8. Select a Visible Layer Group
  9. Hide Layers
  10. Hidden Layers On/Off
  11. Restore Default Visibility of Layers
  12. Zoom Extents
  13. Zoom a Selected Area
  14. Zoom Previous
  15. Set a Local Coordinate System
  16. Mark the Environment of the Smart Model / Mark Exceptional Parts
  17. Select a Smart Model in the Main Model
  18. Release and Unrelease a Working Window

Tool strip - 3D

  1. Verify Distance
  2. Limit Snapping to Objects in the Model
  3. Selection Filter
  4. Parallel Projection
  5. Isometric Projection
  6. Select a Projection From the Model
  7. Other View
  8. Shading
  9. Set 3D Limits
  10. Delete 3D Limits
  11. Set a Local Coordinate System
  12. Mark the Environment of the Smart Model / Mark Exceptional Parts
  13. Select a Smart Model in the Main Model
  14. Release and Unrelease a Working Window