0502 Longitudinal Cut by Line

You can notch a piece longitudinally by line. The piece is notched in full-length.

1. Select Modeling | Connection | Joint Profiles Connection Details.
2. Select the folder Notch / Piece in the browser.
3. Select 0502 Longitudinal Cut by Line.
4. Select a part.

   

5. Click the cutting line with two points.

   

   The program marks the cutting point with an arrow symbol. The arrow direction points the part that will be cut off.

   

6. If necessary, mirror the direction by clicking the arrow.

   

7. Select Confirm.
8. Quit by pressing the Esc key.