Smart Dimensioning Settings (2D)

This function can be used to define the properties of extension lines and dimension positions in a drawing. Define dimensioning properties in the dialog box.

1. On the tab, in the Dimensions group, select Dimension, and click Settings.
2. Select the tab Smart dimensioning.

Mark radius + center

Distance: Sector size

Defines the dimensioning direction when distance dimensions are added. Specify an angle value for the sector size. In sector S1, the shortest distance between the points is dimensioned.

Radius and diameter on the reference line

Dimension figure is added to a reference line.

Diameter: Sector size

Enables a diameter dimension (default) similar to the distance dimension for the sector area. Specify an angle value for the size of sector S2.