Example: Framing Drawing-model Pair of Foundations
The template project included in the basic software delivery has a "Foundation, framing" drawing-model pair. The customer-specific template projects do not necessarily have this drawing-model pair. However, the drawing-model pair is necessary if you wish to set the foundations visible in the framing model. Add the drawing-model pair to the template projects, if necessary. You can also add the drawing-model pair to an individual project.
- Open the template project.
- Open the project's document browser.
- Right-click Settings.
- Select Create New Drawing-model Pair.
- Make the following selections:
- 2D Drawing:: fnd.vxp
- 3D Model: FRAMING.vxm
- Description: Foundation, framing
- Parameter Set: FOUNDATION
- Confirm by clicking OK.
Set a serial number for the drawing-model pair as follows:
- Right-click Settings.
- Select Edit Drawings and 3D Models of Project.
- Move to the row of the drawing-model pair you just added (the last row).
- Enter a serial number in the Order field. For example, if the serial number of the Foundation drawing-model pair is 2, enter 3 as the serial number of the framing drawing-model pair of the foundations.
- Make sure, that the value in the In use field is YES.
- In the Properties field of the Foundation drawing-model pair (number 2), add the number of the corresponding framing drawing-model pair. In this case 3, FRAMING= 3.
- Confirm by clicking OK.