Selecting the Wall Type

With some wall functions, you can limit the number of walls selected by choosing a basic wall type.

1. Select a function, for example Modeling | Wall Layout | Wall Change.
2. Select the wall type from the auxiliary menu.
   • Select Exterior Wall - When the function is selected, you can select exterior walls.
   • Select Interior Wall - When the function is selected, you can select interior walls.
   • Select All of Same Type - When the function is selected, you can select all walls of the same type by clicking one wall of the desired type. The walls are of the same type when they have the same parameters. Either of the basic wall types must be selected at the same time.
3. Select the wall or walls in one of the following ways:
   • Click the walls one by one. Hold down the Ctrl key.
   • Limit an area.
   • Select all the walls representing the basic wall type by pressing Ctrl+A.
   • If you selected the function Select All of Same Type, click one wall of the desired type. All the other walls of the same type become selected at once.
4. Select Confirm.
5. Etc.