Add Corner Trims

Architectural

Add wall-high or roof-stretched corner trims to selected corners. The corner trims are added to both the inner and outer corners. If necessary, delete the extra corner trims.

  1. Activate the model window.
  2. Select the walls that form a corner.
  3. Select Wall | Corner Trim.
  4. Select the corner trim set in the browser. Select a browser folder and double-click the corner trim set.
    The standard delivery of the program includes corner trims in the following folders:
    • Corner Trims - Wall-high corner trims for all selected corners.
    • Corner Trims to Roof - Corner trims stretched to the roof to the selected corners. The program trims the corner trims to the nearest roof.
    • Corner Trims Inside - Wall-high corner trims on the inside of the building.
Note:
  • You can also add corner trims to all corners at once, see Add Corner Trims to All Corners.
  • You can also add corner trims of selected height, see Add Corner Trims of Selected Height.
  • You can change the corner trims by defining a component change rule. Select components of the type Corner Trim to be changed. Alternatively, you can define the change operation of corner trims by using the component type Profile.
  • The object type of the corner trims is Eave and Wall Trims.