Draw a Ground Level Line to an Elevation View

You can edit the elevation views generated from the drawing generation model of the building by adding a ground level line to the elevation view. The part of the foundation left under the ground level line can be completely hidden or drawn with a dashed line. The presentation method depends on the layer to which the ground level line is added:

  • 93 Dashing ground line
  • 94 Clipping ground line
Note: The final result is displayed on the drawing sheet to which the views have been added.

Draw the ground level line as follows:

  1. Open the desired elevation view into a separate drawing window. Use either of the following tools:
    • If you haven't created the elevation drawing yet, open the view with the function Update Views.
      • Select the view in the Views list box of the dialog box.
      • Select the check boxes Update views and Update models.
      • Select Drafting as the opening mode of the view.
    • If you have already created the elevation drawing and the drawing sheet is open in the workspace, you can open the view with the function Open a View Drawing from a Sheet.
  2. Add the ground level line to the view. Select the Polyline (2D) function.
    • Select an appropriate line type on the Properties tab.
    • Select the layer on which the line is to be added.
      • If you want to display the foundation with a dashed line, select the layer 93 Dashing ground line.
      • If you want to hide the part of the foundation left under the ground level line, select the layer 94 Clipping ground line.
  3. Click the line points.
  4. Close the drawing window and save the changes.
    • If you opened the view from the elevation drawing sheet, close the drawing sheet as well and save the changes.
  5. Update the elevation drawing with the function Update and Open a Drawing Sheet.
    • Select the elevation drawing in the Sheets list box of the dialog box.
    • Select the check box Update views.
    • You can clear the check box Update models, if you haven't done any changes to the building model after creating the elevation drawing.
Note:
  • You can add building height data to an elevation drawing by first opening the elevation view on the drawing sheet by using the function Open a View Drawing from a Sheet, and then adding the height data to the view with the function Add a Height Symbol.
  • The ground level line can also be formed based on the terrain model. See Ground Level Line From Terrain Model.
  • If you are using the Option System, you can also add the ground level line to a job-specific drawing file. Add the elevation view and the job-specific drawing file on top of each other on the drawing sheet.