Create Part Drawings

Framer

Generate the part drawings of the selected panels. You can create drawings of frame parts of sheets. You can create drawings of all parts, or skip simple parts.

  1. Select the panels.
  2. Select Panel | Open drawing > Create part drawings.

    If you selected trusses, select Truss | Panel | Open drawing > Create part drawings.

    The Part Drawings dialog box is opened.

  3. Select the parts of which you want to create drawings in the dialog box.

    The Part Drawings Dialog Box

  4. Confirm by clicking OK.

The program will generate the part drawings of the selected panels. The drawings are saved in the building’s "sep" folder. You can open the part drawings with the Open Part Drawings function.

Note:
  • A panel drawing must be created of a panel before a part drawing can be created.
  • You can check the part drawing status of the building’s panels, and create, open or delete the drawings, if necessary with the function Check Part Drawing Status.