Delete Part Drawings

Delete the part drawings of the selected panel as follows:

1. Select the panel.
2. Select Panel | Open drawing > Delete part drawings.
3. Select the part drawings from the list based on the panel label and part number.

Delete the part drawings of a panel in the document browser

1. Open the branch Structural drawings in the document browser.
2. Open the branch Wall panels, Floor panels or Roof panels.
3. Open the branch of the panel’s panel drawing [panel label ].
4. Open Part drawings or Sheet drawings.
5. Select the part drawing to be deleted. You can select several part drawings in the following ways:
   • Select the individual part drawings by holding down the Ctrl key.
   • Select a set of part drawings:
     1. Click the first part drawing.
     2. Press the Shift key, and click the last part drawing of the set.
6. Right-click to open the context-sensitive menu.
7. Select Delete.
8. Confirm the deletion of the part drawings.

Delete the part drawings of several panels

1. Select Output | Panels and trusses | Panel drawings > Part drawings.
2. Select the panels the part drawings of which you want to delete.
3. Right-click to open the context-sensitive menu.
4. Select Delete.
5. Select the part drawings from the list based on the panel label and part number.
6. Click Exit to close the dialog box.