Zoom All

You can set the drawing or the model visible entirely, in the working window. Elements that have been partially or entirely zoomed or panned, for example, displayed in the working window in their entirety.

Do either of the following:

  • On the tab, in the View group, click Zoom All.
  • Press the A key.
Note:
  • Drawing - Zoom All searches the drawing limits again.
  • Model - Zoom All shows all geometry inside the model limits.
    • However, this does not recalculate the model limits if the geometry has fallen outside the model limits.
    • The model limits are recalculated, for example with the F5 key.