Extra Backers

Framer

An extra stud can be used as a backer on an intersecting wall, for example. Add the backer macro as follows:

Select Modeling | Panel | Wall > Wall Panel Layout Accessories.
Select Extra backers to floorplan from the browser. The Extra Backer Properties dialog box opens.
Select the backer properties:
- Number of studs - Select from the list.
- Section - Cross section dimensions of the extra stud. Select the cross section from the profile library by clicking the Sel button.
  Piece Properties
- Side - Select either of the following as the location of the extra stud:
  - Int - The extra stud is positioned on the inner surface (A) of the frame.
  - Ext - The extra stud is positioned on the outer surface (B) of the frame.
Confirm by clicking OK.
Select a wall.
If necessary, change the locating point of the macro, or select another auxiliary function. By default, the locating point is the center point of the stud or stud group.
Auxiliary Functions for Locating a Panel Macro
Select a location for the macro.
Quit by pressing the Esc key.

Note:

You can relocate the panel macro by dragging the grip point before generating the panel breaks.
Once you have generated the wall panels and added parts to them, you can add a backer, stud, or blocking to the panel by using the function Framing Accessories - Studs.