Rotate with the Cursor Keys

You can rotate the model by using the arrow keys.

1. Select View | Projection | Isometric Rotate.
2. Select the speed of movement with the number keys 1 (minimum) to 7 (maximum). You can also change the speed during rotation.
3. Rotate the model by pressing the cursor keys:
   • Arrow right
   • Arrow left
   • Arrow up
   • Arrow down

   You can change the direction by pressing the arrow keys. The first press stops the movement, the second press changes direction.

4. To stop rotating, press the Enter key.
5. After stopping, you can restart the rotation.
6. Quit the rotation by pressing the Esc key.

If the model disappears from the working window, you can restore it by selecting one of the standard projections from the tool strip or in the Projection group on the View tab.