Framing Tools: Frame - Wall Sub Frame

Framer

Tool for a wall panel's sub frame layer (FRAME, FRAMING). Select Tool from the list. If necessary, edit the tool parameters in the dialog box. The parameters define the cross sections, spacing, and other necessary values of the parts.

The thickness of a layer changes according to the selected cross section. The thickness only changes in the structure model, not in the architectural model.

Frame: Gen

Spacing
Select the part spacing from the list or type the desired value in the text field.
If you select the Parts option for aligning on the Direction and Alignment tab, the parts will be positioned at the locations of the main frame parts according to the spacing of the main frame.
Cross sections
Select the cross sections for the sub frame parts. If a cross section field is empty, a part will not be added.
  • Piece - Sub frame stud.
  • Side Piece - Side stud.
  • Header Piece - Bottom and top plate.
Change the piece with the Sel button. Select the profile library and cross section in the Piece Properties dialog box.
Part Properties
Opening offsets
Defines the distance of the pieces to be placed at the edges of the opening from the edges of the opening. Enter the values in the Top/Bottom (A) and Left/Right (B) fields.
Insulation
Select this checkbox, when you want to add insulation to a sub frame layer. Select the insulation from the insulation library with the Select button. The default thickness of insulation is the thickness of the layer.
If the frame consists of I-beam structures, select whether to add the insulation to the profile web or not:
  • No - The insulation will be added according to the profile's rectangular cross section.
  • Yes - The insulation will be added according to the I-beam cross section.

Direction and Alignment

Flip
Defines the rotation angle by which the direction of the sub frame will be rotated in relation to the main frame layer. Select 0, 90, 180 or 270 from the list.
Align
Defines the origin point of the sub frame. The part spacing is started at the origin point. Select from the list:
  • Left - When Rotate = 0 (vertical sub frame), the spacing is started at the left edge of the panel, viewed from the inside. When Rotate = 90 (horizontal sub frame), the spacing is started at the bottom edge.
  • Right - When Rotate = 0 (vertical sub frame), the spacing is started at the right edge of the panel, viewed from the inside. When Rotate = 90 (horizontal sub frame), the spacing is started at the top edge.
  • Middle - The spacing is started at the middle, to both directions.
  • Parts - The parts will be positioned at the locations of the main frame parts (Rotate = 0 or 180).
Offset
Defines an additional offset, when you select the Left or Right option for aligning. A positive value moves towards the frame area, a negative value away from the area.