Edit the Framing Tools of More than One Structure

Framer

The default framing tools for the layers of a structure can be set in the structure library. You can change framing tools by editing the structure properties.

Once the panel breaks have been generated, changes made to the wall, floor, ceiling or roof are no longer transferred to the panel. After this, the changes in framing tool need to be made for the panel and its layers.

Edit the properties of one or more identical structures as follows:

  1. Select one or more structures with the same parameters. The structure can be a wall, horizontal structure or panel.
    • Wall, horizontal structure

      Select walls or horizontal structures in the architectural model, in the floor plan drawing or in the object tree. Horizontal structures must have the same presentation method (expanded/compressed).

    • Panel without parts

      You can select panels of the same type in the framing model, in the floor plan drawing or in the object tree. You can click a panel label in the floor plan drawing or in the object tree.

    • Panel with parts

      You can select panels of the same type in the framing model, in the floor plan drawing or in the object tree. You can click a panel label in the floor plan drawing or in the object tree. In the framing model, you can select panels by using a part:

      1. Hold down the Alt key and click a part. The entire panel becomes selected.
      2. Hold down the Ctrl+Alt keys, and click a part in another structure. The entire panel becomes selected.
  2. Open the context-sensitive menu, and select either of the following:
  3. Add or change the layer tool.

    Framing Tools Dialog Box

  4. Confirm by clicking OK. The editing will take effect in all the selected structures.

If you had already generated the parts, regenerate them, and update the panel drawings of the panels. The program prompts you to update the panel drawing when you open the drawing.

Note:
  • You can edit panel properties after creating the panel breaks.
  • Before creating the panel breaks, you can change the framing tool parameters by editing the properties of the wall or horizontal structure.
  • If the selected panels do not match, the following error message will be displayed: "Layers have different framing tools. Differences in layers detected. Cannot edit properties."