Adding a Log Wall Extension to a T Intersection

Log House Design

You can add a log wall extension to the T intersection between a wall with a wooden frame and panel siding and a log wall or between two walls with a wooden frame. The program regenerates the wall panel siding in accordance with the log division of the wall extension. A corner joint is automatically created between the wall and the wall extension.

  1. Do either of the following:
    • Select Modeling | Wall Layout | Wall.
    • Right-click to open the context-sensitive menu, and select Insert Wall.
  2. Select a log wall library and a parametric log wall.
  3. Select the parameters of the corner extension. Note the following parameters in particular:
    • Log profile: Select the log profile height according to the panel height.
    • Wall base height: Select according to the wall with a wooden frame.
    • Wall height: Select according to the wall with a wooden frame.

    Log Wall Parameters

  4. Select Add Log Wall Extension to T Intersection from the auxiliary menu.

  5. Select the wall that connects to the log wall or wall with a wooden frame.

  6. You will be prompted: "Delete old connecting parts?" Select Ignore to retain the original T connection of the framed wall.

  7. Quit by pressing the Esc key.

Note:
  • You can add an interior wall with a wooden frame and panel siding with the Log Panel Wall function.