End Connection

Framer

Add the joint in the model window.

a = Stiffener

  1. Select Modeling | Panel | Floor Framing Accessories. The browser is opened.
  2. Select the Roof Accessories folder in the browser.
  3. Select End connection.
  4. Select the parameters in the dialog box:
    • Stiffener amount on one side (PCS) - The same number of stiffeners are placed on both sides of the web.
    • Stiffener thickness (T)
    • Stiffener width (W)
  5. Confirm by clicking OK.
  6. Click the start and end point of the cutting line.
  7. Select the profile ends. Select the ends one by one or use area selection.
  8. Select Confirm.

Note