Edit the Drawing Sheet Size

The size of the drawing sheets is determined by the basic project. If necessary, you can change the size of an opened drawing sheet as follows:

  1. Select Output | Drawings | Drawing Sheets.
  2. Select the drawing sheet in the dialog box.
  3. Click the Open button.
  4. Remove the borders of the drawing sheet, for example as follows:
    1. Select the boundary line.
    2. Press Delete.
  5. Add a new sheet of the desired size. Select Modeling | Accessory Component | Component gallery Component, and the Drawing Forms folder in the browser.
  6. Save the sheet, either with the same name or under a new name.
  7. Close the sheet.

Editing Drawing Sheets of a Template Project

You can permanently change the size of a drawing sheet for all buildings that will be created based on the template project in question as follows:

  1. Select > Open Project.
  2. Select the template project in the dialog box.
  3. Select Output | Drawings | Drawing Sheets.
  4. Select the drawing sheet in the dialog box.
  5. Click the Open button.
  6. Remove the borders of the drawing sheet.
  7. Add a new sheet of the desired size. Select Modeling | Accessory Component | Component gallery Component, and the Drawing Forms folder in the browser.
  8. Save the sheet.
  9. Close the sheet.
  10. Close the project.