Select the conditions for optional openings in the Option Conditions for Opening Trims dialog box.
Dialog Box Options
- Option condition
- Select the options to which the selected task in the Function box applies.
- Find the option code from the Options database by clicking the Select button. The Project Options database view opens. Move the cursor on the desired row and click the OK button.
The Project Options Database View- You can use three operators to define conditions for the selected task:
- And - For example A and B. The selected task will only apply if both options A and B are selected when you solve the options.
- Or - For example A or B. The selected task will only apply if option A or option B is selected when you solve the options.
- Not - For example A and not B. Note the syntax “and not”. The selected task will only apply if option A is selected and option B is not selected when you solve the options.
- Select one of the radio buttons, if necessary, and then select another option from the Options database. The logical operations are performed in the following order: first the Not operation, then the And operations and finally the Or operations.
- New
- Click the button to define another task, for example another optional trim set. The fields in the dialog box will be cleared, and you can select another options, conditions between options and a task in the Function box. The conditions will be added to the Condition list.
- Delete
- To delete a condition, select the condition from the Condition list, and click the Del button.
- Function
- Select one of the following tasks:
- Add trim set - When the option conditions come true, the trim set selected from the Values list will be added to the selected opening.
- Add opening - When the option conditions come true, the selected opening will be added.
- Delete opening - When the option conditions come true, the selected opening will be deleted.
- Move opening - When the option conditions come true, the selected opening will be moved. Define the new location of the opening by entering the offset coordinates in relation to the original location in the Dx, Dy and Dz fields.
- Parameters
- Select the opening trim set to be added from the list.
