Select the conditions for the optional profile in the Option Conditions for Profile dialog box.
Dialog Box Options
- Option condition
- Select the options to which the selected task in the Function box applies.
- Find the option code from the Options database by clicking the Select button. The Project Options database view opens. Move the cursor on the desired row and click the OK button.
The Project Options Database View- You can use three operators to define conditions for the selected task:
- And - For example A and B. The selected task will only apply if both options A and B are selected when you solve the options.
- Or - For example A or B. The selected task will only apply if option A or option B is selected when you solve the options.
- Not - For example A and not B. Note the syntax “and not”. The selected task will only apply if option A is selected and option B is not selected when you solve the options.
- Select one of the radio buttons, if necessary, and then select another option from the Options database. The logical operations are performed in the following order: first the Not operation, then the And operations and finally the Or operations.
- New
- Click the button to define another task. The fields in the dialog box will be cleared, and you can select another options, conditions between options and a task in the Function box. The condition will be added to the Condition list.
- Delete
- To delete a condition, select the condition from the Condition list, and click the Del button.
- Function
- Select one of the following tasks:
- Add - When the option conditions come true, the selected profile will be added to the floor plan.
- Delete - When the option conditions come true, the selected profile will be deleted.
- Move - When the option conditions come true, the selected profile will be moved. Define the new location of the group by entering the offset coordinates in relation to the original location in the Dx, Dy and Dz fields.
- Change - When the option conditions come true, the cross section of the selected profile will be changed. Select the cross section library from the Profile Library list and then select the cross section size from the Cross Section list.
- The parameters Offset Top and Offset Bot can be used when optionalizing the length of corner trims. Type the offset values in relation to the original top height or bottom height of the corner trim.
