Select the Height System

Framer

Define the height system for the height symbols of a wall panel drawing as follows:

  1. Select Classic Wall Framing | Panel | Open.
  2. In the floor plan, select the panel whose panel drawing is to be opened. Click the center line of the panel.
  3. Open the building's document browser.
  4. Open Settings > Design settings.
  5. Double-click Height symbols.

    The Building Height Data database view opens.

  6. Select the height system:
    • Show heights relative to building origin
    • Show absolute heights

    Height markings added to the wall panel drawing receive a height value according to the selected system.

    The values entered in the building coordinates and height data are presented as millimeters (mm) in the fields Building height relative to model origin and Building origin absolute height.

  7. Select the number of decimals in height marks from the Digits list.
    • 1: +2.3
    • 2: +2.26
    • 3: +2.255
    • 4: +2.2550
  8. Select the precision of the height marks from the Precision list.
    • 1: +2.2550
    • 10: +2.2600
    • 100: +2.3000
    • 1000: +2.0000
  9. If necessary, select the Notes tab and define the drawing and model files of the height marking.
  10. Close the database view by clicking OK. The changes are updated on the height marks of the wall panel drawing.
Note: