Smart Dimensioning Settings

This function can be used to define the properties of extension lines and dimension positions in a drawing. Define dimensioning properties in the dialog box.

1. Select Drawing | Dimensions | Fast Dimensioning > Settings.
2. Select the tab Smart dimensioning.

Mark radius measure’s center

Distance: Size of sector

Defines the dimensioning direction when distance dimensions are added. Specify an angle value for the sector size. In sector S1, the shortest distance between the points is dimensioned.

Radius and diameter with reference line

Dimension figure is added to a reference line.

Diameter: Size of sector

Enables a diameter dimension (default) similar to the distance dimension for the sector area. Specify an angle value for the size of sector S2.