Other Dimensioning Settings

Defines the properties of dimension lines and the position of the dimension in the drawing. Define dimensioning properties in the dialog box.

On the tab, in the Dimensions group, select Dimension, and click Settings.
Select Others tab.

Factor for distance between dimensions: Defines a standard distance at which a new dimension is positioned in relation to another dimension, when that dimension is defined as the position for the new dimension.; The dimension is placed at a distance of Factor * dimension height. The default value for the factor is 2.857.
Factor for distance of dimension from line: Defines a standard distance at which a new dimension is positioned in relation to the dimensioned element when, for example, a point on the dimensioned element is defined as the position for the new dimension.; The dimension is placed at a distance of Factor * dimension height. The default value for the factor is 4.857.
Dimensioning tools make constraints: Vertex G4: Defines a dimension added using the dimensioning function as a constraint when this checkbox is selected. You can edit a geometry by editing a numerical value of a dimension.; Vertex BD: A dimension added using the dimensioning function cannot automatically act as a dimension constraint. If necessary, you can define the dimension act as a constraint by editing the dimension properties. Select the Drives geometry property for a dimension.
Automatic leader lines when dimension is added to tangent point (smart dimensioning): Defines the adding of extension lines to a tangential point during dimensioning when this checkbox is selected. If the checkbox is cleared, the extension lines will not be drawn.
Automatic centering of dimension text (smart dimensioning): Defines the dimension to be automatically positioned in the center of the dimension line when this checkbox is selected.
Automatic centering of dimension text (chain and baseline): Defines the automatic positioning of dimensions for linear and chain dimensioning after you have selected the position of the first dimension (default). If the checkbox is cleared, you must position each dimension separately.
Draw zero to begin (continuous baseline): Defines a zero (0) to be drawn at the start of the first dimension in baseline dimensioning. If the checkbox is cleared, the zero will not be drawn.
Delete dimension if connection is lost: Defines the dimension to be deleted automatically, if an element is removed from the geometry to which the dimension was added. If this checkbox is cleared, this kind of dimension will be retained in the drawing, but it will be highlighted in a different color than default color.