Smart Dimensioning Settings (2D)
This function can be used to define the properties of extension lines and dimension positions in a drawing. Define dimensioning properties in the dialog box.
- On the tab, in the Dimensions group, select Dimension, and click Settings.
- Select the tab Smart dimensioning.
- Mark radius + center
- Distance: Sector size
- Defines the dimensioning direction when distance dimensions are added. Specify an angle value for the sector size. In sector S1, the shortest distance between the points is dimensioned.
- Radius and diameter on the reference line
- Dimension figure is added to a reference line.
- Diameter: Sector size
- Enables a diameter dimension (default) similar to the distance dimension for the sector area. Specify an angle value for the size of sector S2.