View Bend Data of Bent Pipes

General

• This function can be used to print data of the bent pipes added by the piping design.
• Bending data can be used with pipe bending machines.
• The function has been implemented for the needs of the Vertex G4 Plant program (Plant design), but it is also available to a limited extent in Vertex G4, at least if the model was first made with the plant design program.
• Note that the model must have bent pipes. If the model only has pipelines that use pipe curves, the function does nothing.
• Pipelines designed with Vertex G4 do not include the so-called position number, based on which the separate pipelines can be separated, so the function can be used in Vertex G4 if the model was designed with Vertex G4 Plant.
• You cannot edit the bending data list in such a way that the data is saved or printed.

View and print bent pipe data

1. Select the function
   • Assembly | Tools | Parts List > Bending Data of Bended Pipes.
   • The function opens a list of pipelines with bent pipe sections.

     

2. Select the pipelines (positions) whose data you want to view or process.
   • With the All/None button, you can select all lines at once or all lines off at once.
3. Select OK.
   • The program opens the BENDING DATA OF BENDED PIPES dialog box and lists the pipe data from the selected lines, i.e. the positions.

     

4. Create the desired listing using the buttons on the upper left side of the dialog box.
5. Click OK or Cancel to close the dialog box.