Add Eaves Trims

With this function, eave trims are added to a roof. Some eave trim sets also include gutters. You can add eave trims to one or several slopes, or to the entire roof. Eave trims are added to all eaves of the slope at once, except the eave sections against walls. The joints of the trim piece ends are formed automatically and the eave trims are combined with the eaves, in which case, for example, if the eave is moved, the eave trims are moved with it.

1. Select the slope. Select several slopes by holding down the Ctrl key.
2. Select Plane Structure | Complementary Parts | Eaves Trims. The Eave Trims dialog box opens.
3. Select the eave trim set in the dialog box.

   The Eave Trims Dialog Box

4. Select Confirm.

Note

• You can also select Modeling | Accessory Component | Component gallery Eaves Trims.
• You can add trims to a single eave by using the Add Trims to Selected Eaves function.
• You can change the eave trims by defining a component change rule. Select components of the type Eave Trims to be changed. The eave trims will be changed slope by slope, in which case the search criteria is formed of roof parameters. Select the eave trim set to be changed to from one of the eave_trim libraries. The eave trims will be changed on the eaves of the slopes that match the search criteria, and on which you have already added eave trims earlier.
• The object type of the eave trims is Eave and Wall Trims.