Wall Parameters
Component Change
Wall parameters that you can use in a search criteria or define to be changed:
STUD_H | Frame thickness. |
INT_NLR_W | Thickness of a nailer on the interior side of the frame. |
EXT_NLR_W | Thickness of a nailer on the exterior side of the frame. |
INT_NAILER | Interior nailer used: 1/0. |
EXT_NAILER | Exterior nailer used: 1/0. |
SID_MTRL | Siding material 1. |
SID2_MTRL | Siding material 2. |
SID3_MTRL | Siding material 3. |
SID_THICK | Siding 1 thickness. |
SID2_THICK | Siding 2 thickness. |
SID3_THICK | Siding 3 thickness. |
SID_OFFSET | Siding 1 ventilation gap. |
SID2_OFFSET | Siding 2 ventilation gap. |
SID3_OFFSET | Siding 3 ventilation gap. |
INTFIN_MTRL | Material of interior finish 1. |
INTF2_MTRL | Material of interior finish 2. |
INTFIN_THICK | Thickness of interior finish 1. |
INTF2_THICK | Thickness of interior finish 2. |
SHT_MTRL | Windscreen sheathing material. |
SHT_THICK | Thickness of windscreen sheathing. |
$KEEP_SHAPE | Remove / keep wall shaping: 0/1. |