0005 Piece End to Piece Connection
- Select Modeling | Connection | Joint Profiles Connection Details.
- Select the folder Notch / Piece in the browser.
- Select 0005 Piece end to piece connection.
- Select the notch parameters in the Piece end to piece connection dialog box:
- Notch depth (d1)
- Notch tolerance (d2)
- Confirm by clicking OK.
- Select the profile to be notched (A).
- Select the profile ends (B). Select the profiles one by one or use area selection.
- Select Confirm.
The ends of the notching profiles are trimmed to the bottom of the notch.