00022 I Beam Joint With Web Stiffeners
- Select Modeling | Connection | Joint Profiles Connection Details.
- Select the folder Notch / I-beam in the browser.
- Select 00022 I-beam joint with web stiffeners.
- Select the notch parameters in the I Beam Connection dialog box:
- Max notch depth (d1)
- Notch depth + (d2)
- Notch height + (h)
- Chamfer dimension (b)
- Web stiffener - The web stiffeners are always added with the joint.
- Library - The profile library of the web stiffener.
- Length - The length of the web stiffener (L).
- Gap (C).
- Use - If necessary, you can type a purpose in the field. It can be used in material collection, for example.
- Confirm by clicking OK.
- Select the I-beam (A).
- Select the profile ends (B). Select the profiles one by one or use area selection.
- Select Confirm.
- If necessary, select to delete the existing joint.
Note:
- You can handle web stiffeners as profiles, but their object type is Building Components.
- You can stretch a stiffener profile by moving the grip point.
- If the beam's cross section changes, the size of the stiffener profile is also updated.
- You can edit the parameters of the joint by double-clicking a stiffener profile in the model.