Edit the Wall Panel Settings Saved in the Library

Framer

You can only edit customer-specific libraries in the custom/complibs/ folder, or the building-specific settings of an open building. You can create a new library as well as edit, add and delete settings.

If a building is open with building-specific settings saved to its own library, this library is also presented in the dialog box. You can recognize a building-specific library from the [P] symbol.

  1. Select System | Structural Libraries | Wall Panel Settings. The browser is opened.
  2. Do one of the following:
    • Create New Library
      1. Activate the folder structure in the left side, right-click and select New Library.
      2. Enter a name for the library in the text box.

      The first customer-specific library is saved in the ../custom/complibs/wall panel_cst folder on the disk. After this, the libraries will be named wall panel_cst_1, wall panel_cst_2, etc.

    • Copy Settings From One Library to Another
      1. Select the library, from which you want to copy the settings. You can copy the settings also from the system library. You can recognize a building-specific library from the [P] symbol.
      2. Select the settings.
      3. Right-click and select Copy.
      4. Select the library, to which you want to paste the settings. If the library from which you copied the settings is a customer-specific library, you can paste the settings in the same library.
      5. Right-click and select Paste.
      6. Enter a name for the settings in the text box.
    • Edit the Settings
      1. Select a library. You can only edit settings in a customer-specific library.
      2. Select the settings.
      3. Right-click and select Edit. The Wall Panel Settings dialog box opens.
      4. Edit the settings, and click OK.

        The Wall Panel Settings Dialog Box

    • Create a New Collection of Settings
      1. Select a library. You can only edit settings in a customer-specific library.
      2. Right-click and select New.
      3. Enter a name for the settings in the text box. The Wall Panel Settings dialog box opens.
      4. Edit the settings, and click OK.
    • Rename Settings
      1. Select a library. You can only edit settings in a customer-specific library.
      2. Select the settings.
      3. Right-click and select Rename.
      4. Enter a name for the settings in the text box.
    • Delete Settings
      1. Select a library. You can only edit settings in a customer-specific library.
      2. Select the settings.
      3. Right-click and select Delete.
  3. Confirm by clicking OK.
Note: You cannot edit the settings of the library included in the basic software delivery, but you can view the settings in the library interface by double-clicking the thumbnail of the settings.
Note: System tab is only available if you are a system administrator.