Adding a Bevel to a Connection Line

You can add a bevel to a corner point of the connection line. You can add, move or delete the bevel with the handle function.

Bevel Using Default Values

  1. Select the connection line.
  2. Activate the corner point handle.
  3. Do either of the followings:
    • Double-click the corner point handle.
    • Select the context-sensitive menu function Bevel (4,4).

The function Bevel (size is asked)defines the default value of the bevel.

Bevel Values Are Asked

  1. Select the connection line.
  2. Activate the corner point handle.
  3. Select the context-sensitive menu function Bevel (size is asked).
  4. Type the bevel values A and B separated with comma (,).

The last entered value will remain as the default bevel value.

Moving the Bevel

  1. Select the connection line.
  2. Activate the center point handle of the bevel line.
  3. Do either of the followings:
    • Click the handle.
    • Select the context-sensitive menu function Move as a Bevel.
  4. Move the position of the bevel by moving the cursor.
  5. Specify the bevel position by clicking.

With this function you can also remove the bevel by clicking the bevel position when the connection line is in the direction of 90 degrees.

You can also move a bevel freely. Moving Freely from a Handle

Deleting a Bevel

  1. Select the connection line.
  2. Activate the center point handle of the bevel line.
  3. Do either of the followings:
    • Double-click the handle.
    • Select the context-sensitive menu function Straighten.