Part Number Data

Define the data of a part number or reference part number added to a designed drawing, including initial number, number increment, associativity to an element, etc.

Dialog Box Options

Part Number / Reference Part Number
Defines the starting number. The drawing has a consecutive numbering, beginning from the starting number. The next number is determined by the increment set for the part number.
If you wish to add the same part number more than once, press the Ctrl key at the same time. Adding the same part number is described in more detail in the section adding a part number.
Increment
Defines the part number increment. Select a suitable value from the list, or enter a new value. For example, the increment can be 1 or 0.1.
Attach to Line, Hatch, Macro
Defines the part number or reference part number associative with a line, hatch or a macro selected from a drawing.
For example, if you attach a part number to a Line, the part number is associative with only the selected single line. If you move the line, the part number moves together. This also applies to other attachments.
If you attach a part number associative to an element, define the part data for the selected element. You can also add a part number without associativity. In that case you need to define the part data for the part number.