Edit the Locating of a Profile
Profile Structure Design
Position a cross section at the ends of a profile part from its reference point, or change the location of the cross section sketch on the guide curve.
Profile Swept on a Guide Curve
You can change the location of the cross section on the guide curve by defining a relative position or the distance from the guide curve's end point.
The reference points of the profile ends cannot be changed.
- Select a profile in the working window.
- On the tab, in the Cross Section group, select Locating.
- You can change the position of the cross section on the guide curve in the dialog box functions as follows:
- Define the relative position.
- Define the distance from the guide curve point. Guide Curve
- Click OK.
Profile Swept Between Points
You can change the reference point at profile ends.
The location of the profile cross section between the points cannot be changed.
- Select a profile in the working window.
- On the tab, in the Cross Section group, select Locating.
- You can change the position of the cross section reference points at profile ends using the dialog box functions as follows:
- Select Profile End from the list.
- Click the Change button.
- Select a new reference point from the cross section.
- Click OK.
In Context-sensitive Menu
Select the context-sensitive function Edit Profile> Location.