Chimney Bottom Plate Reaching Over the Ridge
Architectural, Framer
Define the bottom plate parameters in the dialog box.
Chimney Bottom Plate
- Chimney to ridge (L1)
- Enter the distance from the roof ridge to the chimney edge into the text field.
- Degrees
- Enter the slope of the roof into the text field in degrees, or get the slope from the model as follows:
- Width (W)
- Enter the width of the chimney in the text field.
- Depth (D)
- Enter the depth of the chimney in the text field.
- Horizontal extension (L2)
- Enter a dimension in the text field.
- Vertical extension (L3)
- Enter a dimension in the text field.
- Back slope
- Enter the slope of the roof on the other side of the ridge into the text field in degrees, or get the slope from the model as follows:
- Ridge lip (L4)
- Enter the length of the section reaching over the ridge into the text field.