Combine Roofs by Clipping Both of Them
Use this function to cut two groups of slopes with each other.
- Select the first slopes to be cut.
- Select Plane Structure | Connection | Clip Slopes.
- Select one of the following functions from the auxiliary menu:
- Remove below - Slope sections below the cutting point will be removed.
- Remove above - Slope sections above the cutting point will be removed.
- Ask slopes to remove - The program will ask you to select the slope sections to be removed.
- Select one of the following functions from the auxiliary menu:
- Fit top sides - The tops of the new edges will be joined together.
- Fit bottom sides - The bottoms of the new edges will be joined together.
- Select the second slopes to be cut.
- Select Confirm.
- If all the edges of slopes will not meet, for example if the eave heights are differing,
select how to complete the cutting line:
- Automatically
- Manually - Select the cutting direction by selecting a point.
- If you selected the auxiliary function Ask slopes to
remove, the program activates one section at a time of the selected slopes,
and you can select in a message box whether the section is to be removed or not.
Do either of the following:
- Click Delete in the message box.
- Click Leave in the message box.
Otherwise the program removes the sections either above or below the cutting point automatically.