Delete a Panel

Framer

You can delete one or several wall panels in the floor plan drawing, in the framing model or in the object tree. The panel can be a wall, floor or roof panel. When you delete the panel, the panel data, all the parts of the panel and the panel drawing are also deleted.

  1. Activate the drawing of the drawing-model pair of the frame.
  2. Select a panel label. Select one or more labels by holding down the Ctrl key.
  3. Press the Delete key.

You can delete several panels of the same type as follows:

  1. Activate the drawing or model of the drawing-model pair of the frame.
  2. Do either of the following:
    • In the floor plan - Select the label of one panel.
    • In the model - Select one panel.

    If you wish to select panels of different types, hold down the Ctrl key and select one panel or panel label of each type.

  3. Do either of the following:
    • Select the panels by limiting an area.
    • Select all the panels by pressing Ctrl+A.
  4. Press the Delete key.

Note

  • If you wish to regenerate the panel breaks, first delete all the existing panels.
  • If you have already generated parts for the panels, they will also be deleted. If you only wish to delete the parts, use the Delete Parts function.