Create Module Drawings

A module drawing contains only those parts that belong to the module. A building component belongs to a module if its center point is inside the module line, or exactly on the module line. However, the module line is used to delimit the basic geometry and sub projects if they are within the module limits.

You can create the module drawings either in the project document browser or by adding the drawings to the drawing sheet. You can delete module drawings in the project document browser.

Create or delete module drawings in the project document browser

You can create or delete module drawings in the project document browser as follows:

1. Move the cursor on the title Architectural documents / Module Drawings.
2. Right-click to open the context-sensitive menu.
3. Select Create Module Drawings.
4. From the list, select the drawing of a drawing-model pair of the modules from which you wish to create module drawings, or delete them:
   • When a drawing is selected on the list, module drawings will be created of its modules.
   • When a drawing is unselected on the list, the module drawings of its modules will be deleted.

   As a default, the drawings for the modules of which module drawings have already been created are selected on the list. As a default, the drawings for the modules of which module drawings have not been created are unselected on the list. The module drawings will be created and deleted according to the selections on the list.

Create module drawings by adding a drawing on a sheet

First, open the drawing sheet on which you wish to add a module drawing. Create a new sheet or open an existing sheet. You can add a module drawing on the sheet as follows:

1. Select Output | Drawings | Add Drawing to Sheet.
2. Select Floor Plan Drawing for Module as the drawing type to be added.
3. Select a drawing of the drawing-model pair containing modules.
4. Select the module from which you wish to create a drawing. The list contains all modules defined in the drawing.
5. The default reference point is the drawing origin. If necessary, select an auxiliary function, which you can use to change the reference point, to mirror a drawing or to change the drawing scale, for example.

   Auxiliary Drawing Positioning Functions

6. Select the location of the reference point of the drawing on the drawing sheet.
7. Save the drawing sheet by selecting > Save.
8. Close the sheet.