Activate the 3D Presentation of a Room

When the Automatic room volumes settings is enabled, the program will automatically create a 3D presentation of each room. You can change the setting as follows:

1. Open the project's document browser.
2. Open Settings > Design settings.
3. Double-click Constraints and sketching.
4. Select or clear Automatic room volumes.
5. Confirm by clicking OK.

Room-specific 3D Presentation

You can enable or disable the 3D presentation for each room separately regardless of whether the Automatic room volumes setting is used or not.

1. Select the room label in the floor plan.
2. Select or clear Room | 3D Space | Room Volume.