Keywords Connected with the Settling Space

The LOGHOUSE setup file may contain the following keywords connected with the settling space.

settling_space

The settling space reserved for the log wall, defined when adding a column.

settling_space = a/b c

• a - Settling space, may have the following values:
  • Xmm - X millimeters.
  • X" - X inches.
• b - Height with settling space a. May have the following values:
  • NET_HEIGHT - Log riser (from the profile library).
  • Xmm - X millimeters.
  • X" - X inches.
• c - Column end from which the settling space is deducted. May have the following values:
  • TOP - Settling space to the top of the column.
  • BOTTOM - Settling space to the bottom of the column.
  • ASK - Ask the user for the end.

Examples:

settling_space = 10mm/1000mm TOP

settling_space = 2mm/NET_HEIGHT ASK

The settling space is only defined using this method if the program does not find the Logw_Settle.prg application development program used to calculate the settling space from the ../custom/sysprogs directory.

Note

• Keywords screw_leg and log_column_descr_set are also connected to the column, described in section Keywords Connected with Log Work Drawings.
• Log work drawings are included in the Log House Work Drawings add-on option.