Rotate Around the Z Axis

Rotating a large assembly model is easier if the rotation is set around the Z axis.

Rotating around the Z axis does not necessarily mean that the Z axis is vertical.

Do as follows:

  1. Select > User Preferences > Drawings, Models.
  2. Select View.
  3. Select Rotate Around Z Axis.
  4. Confirm by clicking OK.
  5. Open a model, and set it in a projection where the Z axis is vertical.
  6. Rotate the model.
Note:
  • If the initial situation before rotating the model is other than, for example, an isometric projection, the Z axis will retain its orientation and will not become vertical.