Connect a Sketch
Defines the new position of the sketch in the geometry of the part in relation to the origin of the sketch. Attachment elements (face, point) of a failed feature, no longer existing in the model, are highlighted in red in the dialog box menu.
Dialog Box Options
- Face
- Select Face from the dialog box list. The attachment face of the sketch is highlighted in the part. The new attachment face must be of the same type. Select a new attachment face (planar face) if you are moving the sketch to a different face of the part.
- Line
- Select Line from the dialog box list. The origin of the sketch is highlighted in the part. Select a new line from the geometry of the part.
- Point (Origin)
- Select Point (Origin) from the dialog box list. The origin of the sketch is highlighted in the part. Select a new origin from the attachment face of the sketch.
- Point (X direction)
- Select Point (X direction) from the dialog box list. The direction of the sketching coordinate system's X axis is highlighted in the part. Select a new X axis direction point from the attachment face of the sketch.
- Change
- This function can be used to reselect a sketch's attachment face, origin, or X axis direction point. First select Face/Point (Origin)/Point (X direction) from the dialog box menu and then click the Change button. Then select a face/point from the geometry of the part. If necessary, accept the element selection with the Confirm function.