Update Log Face Drawing dialog box

Select the log work drawing updates in the Update Log Face Drawing dialog box.

Dialog Box Options

Clip by Roof

Cut the logs in the wall with the roof. End wall logs that are cut will have wedge-shaped ends. To reduce material loss, the end of the wedge may be cut. The cutting point is defined in the LOGHOUSE setup file under the keyword wedge_height. The cutting point can be defined in units of measurement (mm)

wedge_height= N

or as a percentage of the log riser

wedge_height= N%

The roof clipping offset is defined when the roof parameters are selected. If no value has been selected for the parameter, or its value is 0, the program will use the value of the roof_clip_offset keyword set in the LOGHOUSE setup file.

The clipping offset defined by the keyword is displayed in the log work drawing. In the model, the logs are clipped by the bottom surface of the roof regardless of the keyword value.

Roof parameters, see Setting a Roof on Top of a Log Wall.

Clip by Opening Macros

Cuts the logs of the walls at the location of opening macros.

Update Machinings

Automatically updates the added machinings. Machinings are defined in the machining library.

You can update machinings only when the log work drawing is open.

Update Dimension

Update the dimensions that are automatically added to a log work drawing. The dimensions and their locations are defined in the d_Log_Meas database.

You can update the dimensions of a log work drawing only when the log work drawing is open.