Set a Profile Label

As a default, profile labels are formed from a prefix and a sequential number. The prefix depends on the chosen labeling system. Alternatively, you can set the desired label for the profile as follows:

1. Select the profiles. The same label is added to all the selected profiles.
2. Select Profile | Label | Set Label.
3. Enter the profile label in the text box.
4. Confirm by clicking OK.

If the profile already has a label, the new label will replace the old one.

Update New Labels in the Profile Schedule

You can add a profile schedule to a floor plan or update an existing schedule as follows:

1. Select Output | Profiles | Schedule.
2. Select the group, to which the profiles belong, from the list. For example, when you want to add beam labels and a beam schedule, select BEAMS. The Piece Schedule Parameters dialog box opens.
3. Clear the Labels checkbox. Otherwise, the labels you added will be replaced by labels according to the chosen labeling system.
4. Tick the Schedule checkbox and select the Add radio button.

   Piece Schedule Parameters Dialog Box

5. Confirm by clicking OK. The profile schedule added earlier will be updated.
6. If you are adding the profile schedule for the first time, select the schedule location.