Rotate a Component around the X, Y and Z Axis

Piping Design

You can use this function to rotate a part or component to the desired rotation angle in relation to the axes before positioning it in the model window.

Rotate the part as follows:

  1. Select the rotation step: 90 or 15, or enter the angle value in the field.

  2. Rotate the part around the Z axis by clicking the button:

  3. Rotate the part around the Y axis by clicking the button:

  4. Rotate the part around the X axis by clicking the button:

Note

  • You can also rotate a part by using the cursor keys at 90°/15°/specified increments:
    • Around the Z axis, Arrow up.
    • Around the Y axis, Arrow right.
    • Around the X axis, Arrow left.