Chimney Bottom Plate Reaching Over the Ridge

Architectural, Framer

Define the bottom plate parameters in the dialog box.

Chimney Bottom Plate

Chimney to ridge (L1)
Enter the distance from the roof ridge to the chimney edge into the text field.
Degrees
Enter the slope of the roof into the text field in degrees, or get the slope from the model as follows:
  1. Click the Get angle from roof button.
  2. Select a roof slope in the model.
Width (W)
Enter the width of the chimney in the text field.
Depth (D)
Enter the depth of the chimney in the text field.
Horizontal extension (L2)
Enter a dimension in the text field.
Vertical extension (L3)
Enter a dimension in the text field.
Back slope
Enter the slope of the roof on the other side of the ridge into the text field in degrees, or get the slope from the model as follows:
  1. Click the Get angle from roof button.
  2. Select a roof slope in the model.
Ridge lip (L4)
Enter the length of the section reaching over the ridge into the text field.