Select a Continuous Beam's Profile
Select the type and size of the beam profile The data of the selected profile, moment of inertia, distance to upper and lower surfaces from the profile's neutral axis and values of Young’s modulus are displayed in the dialog box fields. If there are no suitable beam profiles available, you can fill in your own profile data in the fields.
The data of the beam profile is grouped in the following files.
File name | Content |
Iz_SFS_2024 | Hot rolled L bar Fe37B |
Iz_SFS_2025 | Un equal sided L bar |
Iz_SFS_2026 | U bars Fe37B |
Iz_SFS_2028 | I bars Fe37B |
Iz_SFS_2029 | I bars Fe37B |
Iz_SFS_2031 | Wide I bars Fe37B |
Iz_DIN_59413L | Cold formed L profiles Fe37B |
Iz_DIN_59413U | Cold formed U profiles Fe37B |
Iz_DIN_59413O | Cold formed O profiles Fe37B |
Iz_MAK_2_257_3 | Stand. Square pipe beam |
Iz_MAK_2_257_4 | Standard. Square pipe beams |
Iz_MAK_2_257_5 | Stand, rounded pipe beams |
Select beam profile as follows.
- In the dialog box's field, select a beam profile.
- Select the size of the beam profile.
- If there are no suitable beam profiles available, you can fill in your own profile data in the fields.
- Confirm the profile data by clicking the Beam selection button.
- If you want to change the beam, click the Change Beam button.
- After adding all supports, click the Next button in the dialg box.
- Calculate and edit results.