Models on a Network Server

When you are using a network server installation, the project archive shared by all users is located on the server. The designer can open the shared model directly from the project archive.

Main designer

1. Create a shared model of the main project in the common project archive. Enter the shared model an ID in such a way that it is easy to determine from which main project the shared model was made.
   • Share the Main Model
2. Save the main project.
3. Tell the designer the ID of the shared model.

Designer

1. Open the shared model’s project from the common project archive. The project document browser displays the text (Shared Model) after the project name.
   • Open Project
2. Design. For example, design panels.
3. Save the project.
4. Tell the main designer that the design is complete.

Main designer

1. Do either of the following:
   • Open the main model’s project. Select the data to be updated in the Smart Model Status dialog box. You can update the geometry of the smart model by clicking Update Geometry. In addition to the geometry, you can update the smart model’s material data, panel drawings and part drawings by clicking Update All. When the smart model is up-to-date, the buttons are not available.
     The options in the dialog box are the same as in the Sub Project Status dialog box.

     • Sub Project Status Dialog Box

     Objects added to the shared model are copied to the main project.
   • If the main model’s project is already open, select the shared model and check that it is up-to-date.
     • Smart Model Status
2. A dialog box opens where you can choose to update the sub project, i.e. the shared model, to the main project.