0500 Longitudinal Cut by Face (Full-length)

You can notch a piece longitudinally by surface. The piece is notched in full-length.

1. Select Modeling | Connection | Joint Profiles Connection Details.
2. Select the folder Notch / Piece in the browser.
3. Select 0500 Longitudinal Cut by Face.
4. Select the surface (A).
5. Select the piece (B). The program marks the cutting point with an arrow symbol. The arrow direction points the part that will be cut off.

   

6. If necessary, mirror the direction by clicking the arrow.

   

7. Select Confirm.
8. Quit by pressing the Esc key.